The JrX Transmitter and Receivers provide tried and true basic triggering as well as the new EZset technology (requires JrX Receiver Studio). EZset enables on camera control of power levels of handheld TTL flashes, Alien Bees, White Lightning and Zeus brand strobes.

This item includes:

• (1) RadioPopper JrX Receiver Studio Unit
• (1) CR123A sized battery
• (1) 8" Data "telephone" cable
• (1) 3.5mm optical slave disable plug
• (1) 12 inch, 3.5mm to 3.5mm sync cable
• (1) 2.5mm sync port adaptor
• (1) 1.4" sync port adaptor

The JrX Transmitter and Receivers provide tried and true basic triggering as well as the new EZset technology (requires JrX Receiver Studio). EZset enables on camera control of power levels of handheld TTL flashes, Alien Bees, White Lightning and Zeus brand strobes. NOTE that the EZset Strobe ability for use with TTL flashes requires the RPcube.

For those looking to really unleash their lighting, try using the PX and JrX systems together. Since all RadioPopper X products are fully compatible, a single PX transmitter unit can control all of your ETTL/iTTL strobes as well as any full power studio strobe with a sync port. Never before has a photographer been able to tailor off camera flash to meet their exact shooting style.

Compatible Devices:
Any strobe capable of firing via a sync port. For EZset Studio compatible devices are any current Alien Bees, White Lightning or ZUES brand strobe. For EZset Strobe, compatible devices include any TTL / "Dedicated" flash for use with Canon or Nikon Camera bodies. The EZset Strobe operation requires the RPcube adaptor.

This item includes:

• (1) RadioPopper JrX Transmitter and all accessories
• (1) RadioPopper JrX Receiver Studio and all accessories

This item includes:

• (1) RadioPopper JrX Transmitter Unit
• (1) CR123A sized battery

Includes:

• (1) 12 inch, 3.5mm to 3.5mm sync cable
• (1) 2.5mm sync port adaptor
• (1) 1/4" sync port adaptor

The RPCube enables the EZset Strobe functionality of the JrX Studio Receiver giving you remote power output control of almost any hand held dedicated TTL flash that is Canon compatible. Using the dials on the JrX Transmitter and/or the digital groups on the PX Transmitter you can adjust your lights up and down right from your camera.

Compatibility Devices:
Almost any hand held dedicated TTL flash that is Canon compatible in addition to the JrX Studio Receiver.

Note:
The EZset Strobe can control roughly 8 stops of flash power. Each 1/8th turn of the dial on the JrX Transmitter will represent 1 stop of flash power. Due to the wide variety of flashes available, each 1/8th turn may be slightly greater or slightly less than 1 stop of flash power.

Cord:
You will use the 3.5mm cord that comes with the JrX Studio Receiver to connect your RPCue to your JrX Studio Receiver.

This item includes:
RadioPopper RPCube for Canon.

The RPCube enables the EZset Strobe functionality of the JrX Studio Receiver giving you remote power output control of almost any hand held dedicated TTL flash that is Nikon compatible. Using the dials on the JrX Transmitter and/or the digital groups on the PX Transmitter you can adjust your lights up and down right from your camera.

Compatibility Devices:
Almost any hand held dedicated TTL flash that is Nikon compatible in addition to the JrX Studio Receiver. Please note the RPCube is not compatible with the SB900 as it is only iTTL compatible.

Note:
The EZset Strobe can control roughly 8 stops of flash power. Each 1/8th turn of the dial on the JrX Transmitter will represent 1 stop of flash power. Due to the wide variety of flashes available, each 1/8th turn may be slightly greater or slightly less than 1 stop of flash power.

Cord:
You will use the 3.5mm cord that comes with the JrX Studio Receiver to connect your RPCue to your JrX Studio Receiver.

This item includes:
RadioPopper RPCube for Nikon.

To take advantage of eTTL/iTTL, manual and High Speed Sync, all while avoiding the drawbacks of line of sight, short range and sunlight interference, you'll need a PX Receiver.

For every off-camera flash you'll use, you will need a PX Receiver. Although the PX receivers and transmitters are compatible with both Canon and Nikon, each receiver comes with a mounting bracket that is specific to either Canon or Nikon flashes.

Compatible Slave Devices (Canon):
SpeedLites 420EX, 430EX, 550EX, 580EX, 580 EX II

This item includes:

• (1) RadioPopper PX Receiver Unit
• (1) Antenna
• (2) AAA sized battery
• (1) Mounting Bracket

PX Receiver Replacement Mounting Bracket and Base for Canon Flashes

Compatible with the following Canon Flash Units:
580EXII, 580EX, 550EX, 430EXII and 430EX

To take advantage of eTTL/iTTL, manual and High Speed Sync, all while avoiding the drawbacks of line of sight, short range and sunlight interference, you'll need a PX Receiver.

For every off-camera flash you'll use, you will need a PX Receiver. Although the PX receivers and transmitters are compatible with both Canon and Nikon, each receiver comes with a mounting bracket that is specific to either Canon or Nikon flashes.

Comp atible Slave Devices (Nikon):
SB-900 AF Speedlight, SB-800 AF Speedlight, SB-600 AF Speedlight

This item includes:

• (1) RadioPopper PX Receiver Unit
• (1) Antenna
• (2) AAA sized battery
• (1) Mounting Bracket

PX Receiver Replacement Mounting Bracket and Base for Nikon Flashes

Compatible with the following Nikon Flash Units:
SB900, SB800 and SB600

The PX Transmitter is the core of the best wireless flash system in the world, the PX System.

To take advantage of the eTTL/iTTL and High Speed Synce, all while avoiding the drawbacks of the line of sight, short range and sunlight interference, you will need a PX Transmitter to control your remote flashes that have a PX Receiver attached. One transmitter will allow you to control as many flashes as you want.

Compatible Master Devices (Canon):
SpeedLites 550EX, 580EX, 580 EX II

Compatible Master Devices (Nikon):
SB-900 AF Speedlight, SB-800 AF Speedlight

This item includes:

• (1) RadioPopper PX Transmitter Unit
• (1) Antenna
• (2) AAA sized battery
• (1) Mounting Velcro

The PX Transmitter Nikon Pop-Up Flash Adaptor allows the PX Transmitter to be attached to a Nikon hot shoe to pick up the pop-up flash iTTL command signal. Note that the PX Transmitter will only work with Nikon pop-up flashes with the ability to send iTTl command signals to remote Nikon flash units.